Skip to content
NETGEAR ProSAFE M4200 10-портов PoE+ мултигигабитов управляван комутатор

NETGEAR ProSAFE M4200 10-портов PoE+ мултигигабитов управляван комутатор

Netgear
SKU KXG0141666

Избери период за изплащане и виж месечната вноска

Месечна вноска Обща сума за плащане ГПР Лихва Банка

Description

NETGEAR GSM4210P M4200-10MG-PoE-Plus 8 x 1G PoE+ Up to 240W Managed Switch with 2 x SFP+
   
Manufacturer NETGEAR
Manufacturer Part No GSM4210P-100NES
 
Marketing Description
The NETGEAR ProSAFE M4200-10MG-PoE+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac access points. Includes eight full power PoE+ and multi-speed 1G, 2.5G ports for 100 meter cable runs, combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points. NETGEAR Multigigabit Ethernet is compatible with most major wireless and switching vendors managed solutions, and the only one with 8x2.5G to the AP and 2x10G line-rate aggregation to the wiring closet. Plenum rated, slim design and mounting accessories allow for access point placement optimization and cabling efficiency.
Product Features
  • Robust performance
    With a switching capacity of 90 Gbps and throughput of 66.9 Mpps, the NETGEAR M4200 Intelligent Edge Series ensures efficient data handling for high-demand networks.
  • Versatile connectivity
    Equipped with a variety of ports including 1/2.5G (PoE+) and 10GBase-X SFP+ ports, this switch offers flexible connection options for a wide range of devices.
  • Advanced management
    Support for CLI, HTTPS, RMON, SNMP, SSH, and Telnet allows for comprehensive remote management, ensuring easy setup and ongoing maintenance.
  • Comprehensive PoE+ support
    With a PoE budget of 240 W, the GSM4210P can power multiple devices, including surveillance cameras and VoIP phones, through its Ethernet cables, simplifying the network infrastructure.
  • Layer 3 switching capability
    Layer 3 advanced switching provides enhanced network efficiency and security, supporting static IPv4 and IPv6 routing, RIP, and MLD for improved traffic management.
General
Device Type Switch - 10 ports - L3 - Managed
Enclosure Type Side to side airflow rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+
Power Over Ethernet (PoE) PoE+
PoE Budget 240 W
Performance Switching capacity: 90 Gbps
Throughput: 66.9 Mpps
MAC Address Table Size 16K entries
Routing Protocol RIP, static IPv4 routing, static IPv6 routing, MLD
Remote Management Protocol SNMP, RMON, Telnet, HTTPS, SSH, CLI
Authentication Method Secure Shell (SSH), RADIUS, TACACS+
Features DHCP support, VLAN support, IGMP snooping, RSTP support, MLD snooping, 16MB packet buffer
Compliant Standards IEEE 802.3ad (LACP), IEEE 802.1AX
Processor : 800 MHz
RAM 1 GB
Flash Memory 256 MB
Expansion / Connectivity
Interfaces 1 x management (Gigabit LAN) 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45
1 x serial (console) RJ-45
1 x console (mini-USB)
1 x USB
6 x 1/2.5G (PoE+) RJ-45
2 x 1/2.5G/5G (PoE+) RJ-45
2 x 10GBase-X SFP+
1 x USB Type A
Power
Power Device Internal power supply
Voltage Required AC 120/230 V
Power Consumption Operational 286.1 Watt
Miscellaneous
Rack Mounting Kit Included
Localisation Europe, Americas
Software / System Requirements
Software Included Drivers & Utilities
Manufacturer Warranty
Service & Support NETGEAR lifetime warranty

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare