Skip to content
KINGSTON 64GB 3200MHz DDR4 CL20 SODIMM Комплект от 2 FURY

KINGSTON 64GB 3200MHz DDR4 CL20 SODIMM Комплект от 2 FURY Impact

Kingston
SKU KXG0135187

Избери период за изплащане и виж месечната вноска

Месечна вноска Обща сума за плащане ГПР Лихва Банка

Description

KINGSTON 64GB 3200MHz DDR4 CL20 SODIMM Kit of 2 FURY Impact
   
Manufacturer KINGSTON
Manufacturer Part No KF432S20IBK2/64
 
Marketing Description
Kingston FURY KF432S20IBK2/64 is a kit of two 4 G x 64-bit (32 GB) DDR4-3200 CL20 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2 G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Total kit capacity is 64 GB. Each module has been tested to run at DDR4-3200 at a low latency timing of 20-22-22 at 1.2 V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below.
Product Features
  • On-Die termination (ODT)
  • 16 internal banks, 4 groups of 4 banks each
  • Bi-directional differential data strobe
  • 8-bit pre-fetch
  • Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop)
General
Capacity 64 GB: 2 x 32 GB
Upgrade Type Generic
Width 69.6 mm
Height 30 mm
Memory
Type DRAM memory kit
Technology DDR4 SDRAM
Form Factor SO-DIMM 260-pin
Module Height (inch) 1.18
Speed 3200 MHz (PC4-25600)
Latency Timings CL20 (20-22-22)
Data Integrity Check Non-ECC
Features Dual rank, On-Die Termination (ODT), Black PCB, sixteen banks, Intel Extreme Memory Profiles (XMP 2.0), AMD Ryzen Ready, unbuffered
Module Configuration 4096 x 64
Chips Organization 2048 x 8
Voltage 1.2 V
RAM Performance Tested - 3200 MHz - 1.2 V - CL20 - 20-22-22
Intel Extreme Memory Profiles (XMP) - 3200 MHz - 1.2 V - CL20 - 20-22-22
Intel Extreme Memory Profiles (XMP) - 2933 MHz - 1.2 V - CL17 - 17-19-19
Miscellaneous
Colour Category Black
Compliant Standards EAR99, JEDEC, Plug and Play
Manufacturer Warranty
Service & Support Limited lifetime warranty (Russia - 10 years)

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare